| SWIMMING POOLS |
| |
| BEFORE THE STORM |
|
- Pool damage can lead to expensive repair bills after the storm if proper precautions are not taken. The pool pump and motor are most vulnerable to damage.
- Water in the pool will act as a shield for the finish of the pool, protecting it from the damaging effects of sand and flying debris. You may lower the water level slightly, but no more than 1-2 feet. Otherwise, the hydrostatic pressure may cause the pool to pop out of the ground.
- Add extra chlorine to the water to prevent contamination.
- Turn off the power to the pool equipment.
- Remove the pool pump motor and store it indoors in a dry place to prevent damage due to flooding. Or, wrap the motor in a plastic material (such as a garment bag) and secure it tightly with tape or rope.
- Remove all loose items from the pool area (furniture, pool cleaning equipment, filter house tops, deck lids, etc.)
- Never put patio furniture or other objects in the bottom of your pool. These items can move during the storm and damage the surface of your pool. Store all items inside.
|
| AFTER THE STORM |
|
- Reinstall the pool pump motor, or remove the wrapping and check for any flood damage.
- Lower the water level to normal for proper skimming action.
- Clean the pool thoroughly to prevent debris from staining the finish.
- Balance the pH of the water, super-chlorinate, and run the filter until the water is clean.
|
|
Updated August 2007
Back to Table of Contents
|
|
|
|
|